obj->frozen is uint32_t. scanf() must use the matching SCNu32 macro for
this destination type.
Use SCNu32 in parse_bpfmap_fdinfo() for the frozen field parsing.
Signed-off-by: Farzan Aman Khan <farzanaman99@gmail.com>
Build sysctl payloads with snprintf() and check for error/truncation before writing.
Use the returned payload length for write() instead of fixed-size writes, so only formatted bytes are written.
On snprintf failure/truncation, print an explicit error message and return -1. On write/open helper failures, return -1 because callers only use success/failure and pr_perror() already logs errno.
Signed-off-by: Farzan Aman Khan <farzanaman99@gmail.com>
rand_ipc_sysctl() and rand_ipc_sem() returned on write() failure
without closing the opened sysctl fd first.
Close fd in both error paths before returning.
Also return a generic failure code (-1) in these helper paths instead of
propagating errno after close(), because close() may modify errno and
callers only use the return value as success/failure.
Signed-off-by: Farzan Aman Khan <farzanaman99@gmail.com>
check_map_is_there() parses %x:%x major/minor fields from /proc/self/maps.
Store these values in unsigned int variables to match the "%x" specifier
and keep the parser warning-free.
Keep the end-address fragment as %*x to avoid gnu_scanf
"assignment suppression + length modifier" -Werror failures.
Signed-off-by: Farzan Aman Khan <farzanaman99@gmail.com>
shared->opt_files and loop index i are size_t values. Printing them with
"%lu"/"%d" is type-mismatched and can produce incorrect output on some
platforms.
Switch these sites to "%zu" in logging and path formatting.
Signed-off-by: Farzan Aman Khan <farzanaman99@gmail.com>
Remove leftover pidfile and criu_service.socket at the start of
the run target. If these files exist from a previous interrupted
run, the service fails to start and read.py hangs forever waiting
on the status fifo.
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
Verify that the page server binds to the address given in
the RPC request when lazy_pages is enabled. Without the fix
in the previous commit, the address was silently ignored and
the page server would bind to 0.0.0.0 instead.
The test sends a PAGE_SERVER request with ps.address set to
127.0.0.1 and lazy_pages enabled, then checks /proc/net/tcp
to confirm the page server actually bound to that address.
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
Add a test that verifies pipe ownership (uid/gid) is preserved across
checkpoint/restore. This test exercises the fix for issue #2984 where
accessing pipes via /proc/self/fd/ failed after restore because the
pipe ownership was changed to root.
The test:
- Creates a pipe and optionally changes ownership (if running as root)
- Records ownership before C/R
- Verifies ownership is preserved after restore
- Tests /proc/self/fd access works after restore
Signed-off-by: Ahmed Elaidy <elaidya225@gmail.com>
Wire riscv64 CRIU core data into the Python coredump generator.
Set EM_RISCV in the ELF header, map GP registers for NT_PRSTATUS,
map FP registers for NT_FPREGSET, and enable the existing smoke test
on riscv64.
The layout follows the current CRIU riscv64 core format and the
Linux RISC-V user ABI.
Partially addresses #2433.
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Add a ZDTM test for the timer_slack_ns checkpoint/restore feature.
The test sets a custom timer slack value (123456789 ns) before C/R
and verifies it is preserved after restore.
Signed-off-by: Ahmed Elaidy <elaidya225@gmail.com>
Add a test that exercises the broken read lease restore path. The test:
1. Opens a file O_RDONLY and takes a read lease (F_RDLCK).
2. Triggers the breaking sequence by attempting a conflicting
O_WRONLY | O_NONBLOCK open (which returns EWOULDBLOCK).
3. Forks a child to verify post-restore lease state.
4. Calls test_daemon() / test_waitsig() to go through C/R.
5. After restore, the child verifies that the lease type is F_UNLCK
(the expected target type for a broken read lease), confirming
that the breaking sequence was correctly re-established.
Without the preceding fix, restore_lease_prebreaking_state() would set a
write lease (F_WRLCK) instead of a read lease on the read-only fd,
causing either a restore failure (EACCES) or a wrong lease type
post-restore. This test fails without the fix and passes with it.
Signed-off-by: Andrei Vagin <avagin@google.com>
When running tests in parallel (-p 2) with GCOV=1, multiple
forked processes race to create ../criu.tree. The check-then-
create pattern (os.access + os.mkdir) allows two processes to
both see the directory as missing and then both attempt mkdir,
causing FileExistsError in the second process.
Replace with os.makedirs(exist_ok=True) which handles the race
atomically.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Adrian Reber <areber@redhat.com>
With GCOV=1, zdtm.py passes the CRIU workspace parent as an
external bind-mount into the test namespace (ZDTM_CRIU). On
restore in the uns flavor CRIU calls open_tree(OPEN_TREE_CLONE)
on that path. Because the workspace is a parent of the user
namespace mount tree, its mounts are MNT_LOCKED, and open_tree
returns EINVAL.
Fix by creating a private bind-mount of the workspace parent at
'../criu.tree' before each test run, then using that path as the
source of the bind-mount inside the ZDTM namespace (ns.c). On
restore, point the external mapping at 'criu.tree' instead of
the raw workspace path.
Because criu.tree is MS_PRIVATE and is created before any CRIU
run, cgroupfs submounts that CRIU later creates inside the
workspace (cg_yard via mkdtemp) do not propagate into it.
open_tree(OPEN_TREE_CLONE, criu.tree) therefore sees no locked
submounts and succeeds.
This replaces the earlier --work-dir workaround, which was
correct in principle but broke the RPC test path where
criu_rpc.__set_opts has no handler for --work-dir.
Fixes: #2911
Signed-off-by: Ahmed Elaidy <elaidya225@gmail.com>
Hardware breakpoints were originally intended to speed up the resume process
by stopping the process at a specific point in the pie code. However, it
turned out that they don't provide a significant speedup and, in some cases,
can even slow it down. This is especially critical for hosts with a large
number of CPUs.
Hardware Breakpoint Restore Performance Benchmark
==================================================
System: Linux 6.17.0-1007-gcp x86_64
CPU: INTEL(R) XEON(R) PLATINUM 8581C CPU @ 2.10GHz
Virt: google
CRIU: Version: 4.2
Iterations per data point: 5
Threads With BP (us) Without BP (us) Diff (%)
-------- ------------ --------------- --------
>>> Benchmarking with 1 thread(s)...
1 391 326 19.9%
>>> Benchmarking with 10 thread(s)...
10 1098 695 58.0%
>>> Benchmarking with 50 thread(s)...
50 3772 2344 60.9%
>>> Benchmarking with 100 thread(s)...
100 6740 4504 49.6%
>>> Benchmarking with 500 thread(s)...
500 31382 19982 57.1%
>>> Benchmarking with 1000 thread(s)...
1000 58617 40568 44.5%
Notes:
'With BP' = hardware breakpoints enabled (current default)
'Without BP' = CRIU_FAULT=130 (FI_NO_BREAKPOINTS, uses PTRACE_SYSCALL)
Positive diff% means breakpoints are slower
Signed-off-by: Andrei Vagin <avagin@google.com>
Install libcriu into a local staging directory (.install/) using
'make install-lib' and reference only that directory during build
and test:
CFLAGS := -I$(INSTALL_DIR)/include/criu
LDFLAGS := -L$(INSTALL_DIR)/lib -lcriu
LD_LIBRARY_PATH=${MAIN_DIR}/.install/lib
Nothing from the non-test part of the repo is used at compile,
link, or run time.
The compile rule is also corrected to use $< instead of $^
for gcc -c.
Fixes: #2927
Signed-off-by: Ahmed Elaidy <elaidya225@gmail.com>
We saw compilation errors like:
error: call to ‘__open_missing_mode’ declared with attribute error:
open with O_CREAT or O_TMPFILE in second argument needs 3 arguments
Let's fix them by adding mode 0777 everywhere.
Before this change the mode was taken randomly from stack (according to
man 2 open) and that is likely not what we want.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Before that patch we always had exactly the same magic and extentsion
patterns generated.
While on it let's fix the data restrictions:
- The length of extension and magic should be non-zero.
- Let's explicitly wrap extension characters with 256.
Fixes: #2886
Co-developed-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
In ns flavor for instance the binfmt_misc is not c/r-ed, but without
this cleanup the test will not detect that as it would inherit correct
unchanged binfmt_misc step which was there on dump.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
In zdtm/static/binfmt_misc we print the string which contains random
bytes, some of which may not map to utf-8. So let's ignore those bytes
we can't show in utf-8.
Else we can get:
File ".../criu/test/zdtm.py", line 660, in print_output
print(output.read())
~~~~~~~~~~~^^
File "<frozen codecs>", line 325, in decode
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xe3 in position 180: invalid continuation byte
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
The Linux kernel already supports per user namespace sandboxed mounts:
21ca59b365c0 ("binfmt_misc: enable sandboxed mounts")
The overall dump/restore logic is based on the fact that a binfmt_misc
superblock is static and is allocated once per a binfmt_misc mount
within a given user namespace. So the code makes a temporary mount to
read/write the entries and then removes it. The binfmt_misc data is
stored to the USERNS image.
Signed-off-by: Dmitry Sepp <dmitry.sepp@virtuozzo.com>
Remove the OpenVZ specific code that was not used outside of the OpenVZ
infrastructure in preparation for implementing support for upstream
Linux kernel binfmt_misc sandboxing.
Signed-off-by: Dmitry Sepp <dmitry.sepp@virtuozzo.com>
Add a test that creates a SIGEV_THREAD_ID posix timer targeting the
thread leader in a multithreaded process. This exercises the code path
where encode_notify_thread_id() must look up the thread leader's vtid
in threads[0].ns[0].virt.
Without the fix in the previous commit, this test fails during dump
with:
Error (criu/timer.c:329): Unable to convert the notify thread id <pid>
The test creates a worker thread (so the process is multithreaded, which
triggers the collect_threads() path) and a SIGEV_THREAD_ID timer on the
main thread, then verifies the timer still fires after C/R.
Signed-off-by: 3idey <elaidya225@gmail.com>
Fedora rawhide ships a pre-release of GCC 16 which produces following
error:
uprobes.c:34:22: error: variable ‘dummy’ set but not used [-Werror=unused-but-set-variable=]
34 | volatile int dummy = 0;
| ^~~~~
Marking this variable as "__maybe_unused" to fix the error.
Signed-off-by: Adrian Reber <areber@redhat.com>
Introduce an opt-in mode for building and running ZDTM static tests
with Guarded Control Stack (GCS) enabled on AArch64.
Changes:
- Support `GCS_ENABLE=1` builds, adding `-mbranch-protection=standard`
and `-z experimental-gcs=check` to CFLAGS/LDFLAGS.
- Export required GLIBC_TUNABLES at runtime via `TEST_ENV`.
- %.pid rules to prefix test binaries with `$(TEST_ENV)`
so the tunables are set when running tests.
- Makefile rules for selectively enabling GCS in tests
Usage:
# Build and run with GCS enabled
make -C zdtm/static GCS_ENABLE=1 posix_timers
GCS_ENABLE=1 ./zdtm.py run --keep-img=always \
-t zdtm/static/posix_timers
By default (`GCS_ENABLE` unset or 0), test builds and runs are
unchanged.
NOTE: This assumes that the test victim was compiled also using
GCS_ENABLE=1 so that the proper GCS AArch64 ELF headers are present
Signed-off-by: Igor Svilenkov Bozic <svilenkov@gmail.com>
Reviewed-by: Alexander Mikhalitsyn aleksandr.mikhalitsyn@canonical.com
When we compare two list of vma-s, we need to take into account that
some of them could be merged.
Fixes#12286
Signed-off-by: Andrei Vagin <avagin@google.com>
The --mntns-compat-mode option is no longer parsed with CHECK.
Use --log-file instead to test the error message.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
The existing test collects all action-script hooks triggered during
`h`, `ns`, and `uns` runs with ZDTM into `actions_called.txt`, then
verifies that each hook appears at least once. However, the test does
not verify that hooks are invoked *exactly once* or in *correct order*.
This change updates the test to run ZDTM only with ns flavour as this
seems to cover all action-script hooks, and checks that all hooks are
called correctly.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
This patch consolidates the action-script tests into
`test/others/action-script` to ensure all tests are executed
consistently and reduce duplication. Since we had two tests that appear
to do the same thing, we can remove the one that doesn't use zdtm.py.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
Extend the test for overwriting config options via RPC with
repeatable option (--action-script) and verify that the value
will not be silently duplicated.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
Program flow:
- Parse the test's own executable to calculate the file offset of the uprobe
target function symbol
- Enable the uprobe at the target function
- Call the target function to trigger the uprobe, and hence the uprobes vma
creation
- C/R
- Call the target function again to check that no SIGTRAP is sent, since the
uprobe is still active
At least v1.7 of libtracefs is required because that's when
tracefs_instance_reset was introduced. The uprobes API was introduced in v1.4,
and the dynamic events API was introduced in v1.3.
Ubuntu Focal doesn't have libtracefs. Jammy has v1.2.5, and Noble has v1.7.
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Add a ZDTM test case where CRIU uses a helper process to restore
a non-empty process group with a terminated leader and a Unix
domain socket. This reproduces a corner case in which mount
namespace switching can fail during restore:
https://github.com/checkpoint-restore/criu/issues/2687
Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com>
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
Travis CI stopped providing CI minutes for open-source projects
some time ago and we have migrated to GitHub actions.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
The previous commit 4cd4a6b1ac ("zdtm: stop importing junit_xml")
removed the junit_xml library, but some variables related to it were
left in the code. This commit removes the unused `tc` variable and a
call to its `add_error_info` method.
Fixes: 4cd4a6b1ac ("zdtm: stop importing junit_xml")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
We are dropping support for generating JUnit XML reports in zdtm.py as we've
migrated testing infrastructure entirely to `GitHub Actions` and other
third-party test runners.
This package has been removed from some distribution repositories (e.g.,
Fedora), making it simpler to remove the dependency than to force installation
via pip.
Signed-off-by: Andrei Vagin <avagin@google.com>
SO_PASSCRED and SO_PASSSEC are only valid for AF_UNIX and AF_NETLINK
This patch updates the test logic to use a unix socket for these options,
while preserving the original value consistency check
Fixes: #2705
Signed-off-by: Dong Sunchao <dongsunchao@gmail.com>
The `offset` argument to `mmap()` was computed with a direct cast from
pointer to `off_t`:
`(off_t)addr_hint - (off_t)map_base`
This causes a build failure when compiling since pointers and `off_t`
may differ in size on some platforms.
maps12.c: In function 'mmap_pages':
maps12.c:114:50: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
114 | filemap ? fd : -1, filemap ? ((off_t)addr_hint - (off_t)map_base) : 0);
| ^
maps12.c:114:69: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
114 | filemap ? fd : -1, filemap ? ((off_t)addr_hint - (off_t)map_base) : 0);
The fix in this patch is to cast both pointers to `intptr_t`,
perform the subtraction in that type, and then cast the result
back to `off_t`.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
The test creates a file bindmount in criu mntns and binds it into test
mntns, this external file bindmount is autodetected and restored via
"--external mnt[]" criu option.
Note: In previous patch we fix the problem on this code path where file
bindmount restore fails as there is excess "/" in source path.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Add ZDTM static tests for IP4/ICMP and IP6/ICMP
socket feature.
Signed-off-by: समीर सिंह Sameer Singh <lumarzeli30@gmail.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
net/unix/max_dgram_qlen can't be tuned from non-root userns before:
v5.17-rc1~170^2~215 ("net: Enable max_dgram_qlen unix sysctl to be
configurable by non-init user namespaces")
Signed-off-by: Andrei Vagin <avagin@google.com>
