To avoid hard coded interface name used all over the place in
`tests_infiniband.yml`, specify a variable to hold the infiniband
interface name instead.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
reason: The administrator wants to suppress the AAAA queries made by
the stub resolver, including AAAA lookups triggered by NSS-based
interfaces such as getaddrinfo. Only the DNS lookups are affected.
result: The administrator is able to suppress AAAA queries made by the
stub resolver.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
reason: The user wants to ignore automatically configured name servers and
search domains (e.g. dns record from DHCP), and only use the name
servers and search domains specified in the `dns` and `dns_search`
properties.
result: The user is able to ignore automatically configured name servers
and search domains.
Notice that there are two settings here distinguished by the address
families, which aims to be compatible with NetworkManager
(`ipv4.ignore-auto-dns` and `ipv6.ignore-auto-dns`)and Nmstate (setting
`auto-dns` on `ipv4` or `ipv6` section). Also, the users can get auto
DNS from DHCPv4, DHCPv6, modem etc, and they may want to ignore auto
DNS on Ipv4 but not on IPv6, in this case, it is better to have two
settings distinguished by the address families.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
Rather than having to maintain .yamllint.yml with a list of files
exempt from yamllint line-length checking, either fix the code
to abide by the line length restriction, or put the yamllint
exceptions in-line in the code.
Signed-off-by: Rich Megginson <rmeggins@redhat.com>
Use standard Ansible spacing for braces and brackets. This
allows us to remove those rule exceptions from .yamllint.yml
Signed-off-by: Rich Megginson <rmeggins@redhat.com>
ansible-lint is confused by the use of `when:` with `lsr_assert_when`.
It thinks the `when` string should be evaluated as a Jinja expression
but it is really just a plain string. To make this more friendly to
ansible-lint, use `condition:` instead of `when:` with
`lsr_assert_when`.
Signed-off-by: Rich Megginson <rmeggins@redhat.com>
In some test playbooks, the `ignore_errors: true` can not be replaced
by `changed_when: false`, because `changed_when` is not a valid
attribute for a IncludeRole.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
Jinja templates should only be at the end of 'name'. This helps with
the identification of tasks inside the source code when they fail.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
Without an explicit output device, the kernel might use a different
output device than intended by the user. Therefore, use the interface
name of connections to specify it if it is available. Otherwise,
educate the user about this potential problem with a warning. This
aligns the behavior with NetworkManager which configures the output
device in routes when activating profiles on devices.
Fixes: https://bugzilla.redhat.com/2168735
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
The bond tests fail regularly in our single host downstream testing,
so mark them as `expfail` (expect to fail) so that these failures
do not clutter up our test results.
We have tried to fix this in the past - several times over the past
three years, at a cost of many man weeks of effort - and the fixes just
don't seem to "take". We have reached the point where we need to cut
our losses and just skip these tests. Perhaps at some point in the
future we can revisit this issue.
Signed-off-by: Rich Megginson <rmeggins@redhat.com>
The users want to create the bonding interface with the MAC address
specified by themselves or specify the strategy (e.g. random, preserve)
to get the default MAC for the bonding interface. Thus, add support for
the cloned MAC address.
Signed-off-by: Sylvain <35niavlys@gmail.com>
When creating a bond, the bond also creates a default route with a
default metric of 0. This causes test failures on CI systems as
it overrides the system default route. Use the new `ip.route_metric4`
parameter to set a high metric value so as not to override the
default system route.
Some systems cannot use a metric value of 32 bit unsigned int max value. To ensure
the broadest possible support, use a metric value of 16 bit signed int max value,
which should be high enough to ensure the routes always have the lowest priority.
Signed-off-by: Rich Megginson <rmeggins@redhat.com>
For initscripts provider, the metric for the default route defaults to
0, as a result, the default route can take precedence or blindly ingore
other routes. Adding a higher route metric value to honor other routes
during the route selection.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
When ports are not attached, the bonding connection may risk not in fully
connected state, e.g. connecting (getting IP configuration). Therefore,
attach ports for the bonding connection.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
Kernel allows to set `arp_all_targets` when `arp_interval` is disabled
(disable ARP monitoring). But `arp_all_targets` specifies the quantity
of `arp_ip_targets` that must be reachable in order for the ARP monitor
to consider a slave as being up. It makes more sense to only set the
`arp_all_targets` while enabling the `arp_interval`.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
The user may need to define the named route table in the routing rule
besides the table id, add support for that.
The commit fixes
https://github.com/linux-system-roles/network/issues/506.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
The users want to apply the nmstate network state configuration to the
interface directly through the role, which necessitates the less
complexity of the network configuration and allows the partial
configuration on the network.
To warrant that the users are capable to apply the nmstate network state
configuration, add the support for the `network_state` variable.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
When testing the infiniband ports in active backup mode, certainly the
physical infiniband device is required to be present upfront. Because
the last commit fixes the bug of wrongly checking the existence of
virtual infiniband device and only checks the presence of the infiniband
device when pkey is not explicitly set, the test which testing
infiniband ports in active backup bonding mode will definitely fail
now. To address the issue, remove the testing code now as it is not
significant for testing the bond options, probably the testing code
will be added back to the dedicated infiniband test playbook for
completeness.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
In order to enable the user using the policy routing (e.g. source
routing) or instructing the system which table to look up to determine
the correct route, add support for routing rules.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
ip.ipv6_disabled is not supported by the running version of
NetworkManager when testing on RHEL-7 or CentOS-7, therefore, skip the
tests on RHEL-7 or CentOS-7.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
In NM, the property `NM_SETTING_IP6_CONFIG_METHOD_DISABLED` is only
supported since NM 1.20, therefore, the role should reject configuring
`ipv6 disabled` if `NM_SETTING_IP6_CONFIG_METHOD_DISABLED` is not
supported by the running version of NM.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
bz#2044640
The network role create an ifcfg file for initscripts. The file
used to append a comment "# this file was created by ansible".
This patch replaces the proprietary string with the ansible
standard {{ ansible_managed }} to adjust to the other system
roles.
For the implementation, it borrowed the method from kernel_settings,
getting the ansible managed comment using the get_ansible_managed.j2
template and pass the comment to network_connections which is added
to the ifcfg file.
In case network_provider is nm, the comment is not added to the
ifcfg file as the file is not managed by Ansible.
Note: the required parameter name to pass the ansible managed comment
to the network_connection module is "__header".
Do not use get_ansible_managed.j2 in the test scripts, but use a
hardcoded ansible managed comment to simplify the tests.
tests/tasks/get_profile_stat.yml: replace the '=' style with the YAML
notation in set_fact.
Signed-off-by: Noriko Hosoi <nhosoi@redhat.com>
In order to enable user to flexibly control the network transmission
over the bonded interface, support all the bond options which are
currently supported by NetworkManager.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
The files must be named so that it explain what happens. In addition,
`down_profile+delete_interface` must use `changed_when` to match the
content of `delete_interface`.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Problem:
After `tests_bridge_initscripts.yml` passed, the `tests_bridge_nm.yml`
will fail with NetworkManager 1.18.
Root cause:
1. The `absent` and `down` action of initscript provider will not
remove the bridge interface which fail the assertion in
`tests_bridge_nm.yml`.
2. In initscript mode, network role will create ifcfg file with
`NM_CONTROLLED=no` instructing NetworkManager to mark the bridge as
unmanaged. The follow up `down` and `absent` action of initscript
provider will not change the NetworkManager's understanding on
unmanaged state of this interface.
Fixes:
1. We cannot change existing behaviour of initscript on not deleting
interface in `down` and `absent` action. So we change the test
function `tests/playbooks/down_profile.yml` to delete the interface
manually via `ip link del <ifname>` command.
2. Use `NM.Client.reload_connections_async()` to reload the
configuration for nm provider on NetworkManager 1.18.
Previous test infrastructure is running each test file in a brand new VM
or container which cause this problem not been found before.
Dedicate test case `tests/tests_switch_provider.yml` included.
Signed-off-by: Gris Ge <fge@redhat.com>
The users want to use the policy routing (e.g. source routing), so
that they can forward the packet based on the other criteria except for
the destination address in the packet. In such scenario, the routing
tables have to be supported beforehand in static routes, so that the
users can define policy routing rules later to instruct the system
which table to use to determine the correct route.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
NetworkManager requires to configure DNS options (such as the search
setting) for each IP family even though it does not matter in the
system's DNS configuration. Also, NetworkManager only allows to
configure the DNS options for each IP family, when they are enabled. In
the network_connections dictionary, the DNS options are configured
without considering the IP family. Therefore, configure ipv4.dns-search
or ipv6.dns-search only if the IP family is enabled.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
Add support for using latest ansible-lint and ansible-test with
ansible-core 2.11. There are a few new warnings that need to
be addressed or suppressed.
One of the changes is to add `# noqa ignore-errors` to the places in
the role where `ignore_errors: true` is used. In general, it is not
a good idea to use `ignore_errors: true` - instead, it is better to
capture the result of the command using a `register`, then use
`failed_when`. Or, if that is not possible, use a `block`/`rescue`
for more complex error handling. However, in the case where the network
role is using `ignore_errors: true` in test code, it is acceptable.
see https://ansible-lint.readthedocs.io/en/latest/default_rules.html#ignore-errors
Another change is to have all tasks have a valid `name:`. This
is explained at https://ansible-lint.readthedocs.io/en/latest/default_rules.html#unnamed-task
Signed-off-by: Rich Megginson <rmeggins@redhat.com>
Users can easily configure or update network connection via matching
physical device path of the interface, which add certain flexibilty of
user experience.
Update connection profile via matching `path` setting:
```yaml
- name: eth0
type: ethernet
autoconnect: yes
# For PCI devices, the path has the form "pci-$domain:$bus:$device.$function"
# It will only update the interface with the path "pci-0000:00:03.0"
match:
path:
- pci-0000:00:03.0
```
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
Enable WPA3 SAE support via:
```yaml
network_connections:
- name: wlan0
type: wireless
wireless:
ssid: "WIFI_SSID"
key_mgmt: "sae"
password: "p@55w0rD"
```
Integration test case was included for Fedora and CentOS. ( Failed in setting up the
mock wifi on RHEL, so skipped the integration test on RHEL)
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
The `tests_bond_initscripts.yml` will leave the VM holding the testing
DNS entry (nameserver 192.0.2.1) which break network connection.
The root cause is initscript will use dhcp-client for bond DHCP testing
which override the /etc/resolv.conf file. After test bond interface been
removed, the initscript will not restore the DNS settings.
The fix is backup the /etc/resolv.conf and restore it on clean up for
initscript provider.
Signed-off-by: Gris Ge <fge@redhat.com>
Previously when we run `tests_integration_pytest.yml` in RHEL 8, device
becoming unmanaged and NM `ifup` command failed to bring up the
connection when running pytest with initscripts, because network scripts
are deprecated in RHEL8 and they are no longer provided by default.
To fix that, install `network-scripts` package to utilize the legacy
`ifup` command.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
Running `tests_bond_deprecated_initscripts.yml` and
`tests_bond_initscripts.yml` consecutively will fail in the downstream
testing with error "Determining IP information for nm-bond...dhclient is already running - exiting.".
Because the two tests have the same controller device name and dhclient
will keep running for the controller device `nm-bond`.
A workaround for this bug is to change the controller device name
associated with `tests_bond_deprecated_initscripts.yml`.
Signed-off-by: Wen Liang <liangwen12year@gmail.com>
