diff --git a/tests/playbooks/tests_bond.yml b/tests/playbooks/tests_bond.yml
new file mode 100644
index 0000000..ab3ee43
--- /dev/null
+++ b/tests/playbooks/tests_bond.yml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: BSD-3-Clause
+---
+- hosts: all
+  vars:
+    master_profile: bond0
+    master_device: nm-bond
+    slave1_profile: bond0.0
+    dhcp_interface1: test1
+    slave2_profile: bond0.1
+    dhcp_interface2: test2
+  tasks:
+    - name: "INIT Prepare setup"
+      debug:
+        msg: "##################################################"
+    - import_tasks: tasks/create_test_interfaces_with_dhcp.yml
+    - import_tasks: tasks/assert_device_present.yml
+      vars:
+        interface: "{{ dhcp_interface1 }}"
+    - import_tasks: tasks/assert_device_present.yml
+      vars:
+        interface: "{{ dhcp_interface2 }}"
+    - block:
+        - name: "TEST Add Bond with 2 slaves"
+          debug:
+            msg: "##################################################"
+        - import_role:
+            name: linux-system-roles.network
+          vars:
+            network_connections:
+              # Create a bond master
+              - name: "{{ master_profile }}"
+                state: up
+                type: bond
+                interface_name: "{{ master_device }}"
+                bond:
+                  mode: active-backup
+                  miimon: 110
+              # add an ethernet to the bond
+              - name: "{{ slave1_profile }}"
+                state: up
+                type: ethernet
+                interface_name: "{{ dhcp_interface1 }}"
+                master: "{{ master_profile }}"
+              # add a second ethernet to the bond
+              - name: "{{ slave2_profile }}"
+                state: up
+                type: ethernet
+                interface_name: "{{ dhcp_interface2 }}"
+                master: "{{ master_profile }}"
+        - import_tasks: tasks/assert_device_present.yml
+          vars:
+            interface: "{{ master_device }}"
+        - include_tasks: tasks/assert_profile_present.yml
+          vars:
+            profile: "{{ item }}"
+          loop:
+            - "{{ master_profile }}"
+            - "{{ slave1_profile }}"
+            - "{{ slave2_profile }}"
+        - command: grep 'Polling Interval' /proc/net/bonding/{{ master_device }}
+          name: "** TEST check polling interval"
+          register: result
+          until: "'110' in result.stdout"
+        - command: ip -4 a s {{ master_device }}
+          name: "** TEST check IPv4"
+          register: result
+          until: "'192.0.2' in result.stdout"
+          retries: 20
+          delay: 2
+        - command: ip -6 a s {{ master_device }}
+          name: "** TEST check IPv6"
+          register: result
+          until: "'2001' in result.stdout"
+          retries: 20
+          delay: 2
+      always:
+        - block:
+            - import_role:
+                name: linux-system-roles.network
+              vars:
+                network_connections:
+                  - name: "{{ slave2_profile }}"
+                    persistent_state: absent
+                    state: down
+                  - name: "{{ slave1_profile }}"
+                    persistent_state: absent
+                    state: down
+                  - name: "{{ master_profile }}"
+                    persistent_state: absent
+                    state: down
+              ignore_errors: true
+            - command: ip link del {{ master_device }}
+              ignore_errors: true
+            - import_tasks: tasks/remove_test_interfaces_with_dhcp.yml
+          tags:
+            - "tests::cleanup"
diff --git a/tests/tasks/create_test_interfaces_with_dhcp.yml b/tests/tasks/create_test_interfaces_with_dhcp.yml
new file mode 100644
index 0000000..97d27b3
--- /dev/null
+++ b/tests/tasks/create_test_interfaces_with_dhcp.yml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: BSD-3-Clause
+---
+- name: Install dnsmasq
+  package:
+    name: dnsmasq
+    state: present
+
+
+- name: Create test interfaces
+  shell: |
+    # NM to see veth devices starting with test* as managed after ip add..
+    echo 'ENV{ID_NET_DRIVER}=="veth",\
+          ENV{INTERFACE}=="test*", \
+          ENV{NM_UNMANAGED}="0"' >/etc/udev/rules.d/88-veth.rules
+    udevadm control --reload-rules
+    udevadm settle --timeout=5
+
+    # Setuptwo devices with IPv4/IPv6 auto support
+    ip link add {{dhcp_interface1}} type veth peer name {{dhcp_interface1}}p
+    ip link set {{dhcp_interface1}}p up
+    ip link add {{dhcp_interface2}} type veth peer name {{dhcp_interface2}}p
+    ip link set {{dhcp_interface2}}p up
+
+    # Create the 'testbr' - providing both 10.x ipv4 and 2620:52:0 ipv6 dhcp
+    ip link add name testbr type bridge forward_delay 0
+    ip link set testbr up
+    ip addr add 192.0.2.1/24 dev testbr
+    ip -6 addr add 2001:DB8::1/32 dev testbr
+
+    if grep 'release 6' /etc/redhat-release; then
+        # We need bridge-utils and radvd only in rhel6
+        if ! rpm -q --quiet radvd; then yum -y install radvd; fi
+        if ! rpm -q --quiet bridge-utils; then yum -y install bridge-utils; fi
+
+        # We need to add iptables rule to allow dhcp request
+        iptables -I INPUT -i testbr -p udp --dport 67:68 --sport 67:68 -j ACCEPT
+
+        # Add {{dhcp_interface1}}, {{dhcp_interface2}} peers into the testbr
+        brctl addif testbr {{dhcp_interface1}}p
+        brctl addif testbr {{dhcp_interface2}}p
+
+        # in RHEL6 /run is not present
+        mkdir -p /run
+
+        # and dnsmasq does not support ipv6
+        dnsmasq \
+            --pid-file=/run/dhcp_testbr.pid \
+            --dhcp-leasefile=/run/dhcp_testbr.lease \
+            --dhcp-range=192.0.2.1,192.0.2.254,240 \
+            --interface=testbr --bind-interfaces
+
+        # start radvd for ipv6
+        echo 'interface testbr {' > /etc/radvd.conf
+        echo '        AdvSendAdvert on;' >> /etc/radvd.conf
+        echo '        prefix 2001:DB8::/64 { ' >> /etc/radvd.conf
+        echo '              AdvOnLink on; }; ' >> /etc/radvd.conf
+        echo '        }; ' >> /etc/radvd.conf
+
+        # enable ipv6 forwarding
+        sysctl -w net.ipv6.conf.all.forwarding=1
+        service radvd restart
+
+    else
+        ip link set {{dhcp_interface1}}p master testbr
+        ip link set {{dhcp_interface2}}p master testbr
+        # Run joint DHCP4/DHCP6 server with RA enabled in veth namespace
+        dnsmasq \
+            --pid-file=/run/dhcp_testbr.pid \
+            --dhcp-leasefile=/run/dhcp_testbr.lease \
+            --dhcp-range=192.0.2.1,192.0.2.254,240 \
+            --dhcp-range=2001:DB8::10,2001:DB8::1FF,slaac,64,240 \
+            --enable-ra --interface=testbr --bind-interfaces
+    fi
diff --git a/tests/tasks/remove_test_interfaces_with_dhcp.yml b/tests/tasks/remove_test_interfaces_with_dhcp.yml
new file mode 100644
index 0000000..59b13a6
--- /dev/null
+++ b/tests/tasks/remove_test_interfaces_with_dhcp.yml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: BSD-3-Clause
+---
+- name: Remove test interfaces
+  shell: |
+    ip link delete {{dhcp_interface1}}
+    ip link delete {{dhcp_interface2}}
+    ip link delete testbr
+
+    # Remove udev rule for NM to see veth devices starting with test*.....
+    rm -rf /etc/udev/rules.d/88-veth.rules
+    udevadm control --reload-rules
+    udevadm settle --timeout=5
+
+
+- name: Stop dnsmasq/radvd services
+  shell: |
+    pkill -F /run/dhcp_testbr.pid
+    rm -rf /run/dhcp_testbr.pid
+    rm -rf /run/dhcp_testbr.lease
+    if grep 'release 6' /etc/redhat-release; then
+        # Stop radvd server
+        service radvd stop
+        iptables -D INPUT -i testbr -p udp --dport 67:68 --sport 67:68 -j ACCEPT
+
+    fi
diff --git a/tests/tests_bond_initscripts.yml b/tests/tests_bond_initscripts.yml
new file mode 100644
index 0000000..8fa74c5
--- /dev/null
+++ b/tests/tests_bond_initscripts.yml
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# This file was generated by ensure_provider_tests.py
+---
+- hosts: all
+  name: Run playbook 'playbooks/tests_bond.yml' with initscripts as provider
+  tasks:
+    - name: Set network provider to 'initscripts'
+      set_fact:
+        network_provider: initscripts
+      tags:
+        - always
+
+- import_playbook: playbooks/tests_bond.yml
diff --git a/tests/tests_bond_nm.yml b/tests/tests_bond_nm.yml
new file mode 100644
index 0000000..52e7e3f
--- /dev/null
+++ b/tests/tests_bond_nm.yml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# This file was generated by ensure_provider_tests.py
+---
+# set network provider and gather facts
+- hosts: all
+  name: Run playbook 'playbooks/tests_bond.yml' with nm as provider
+  tasks:
+    - name: Set network provider to 'nm'
+      set_fact:
+        network_provider: nm
+      tags:
+        - always
+
+
+# workaround for: https://github.com/ansible/ansible/issues/27973
+# There is no way in Ansible to abort a playbook hosts with specific OS
+# releases Therefore we include the playbook with the tests only if the hosts
+# would support it.
+# The test requires or should run with NetworkManager, therefore it cannot run
+# on RHEL/CentOS 6
+- import_playbook: playbooks/tests_bond.yml
+  when:
+    - ansible_distribution_major_version != '6'