* refine the plan
* Fix all staticcheck lint findings (uncapped)
golangci-lint's default max-same-issues=3 was hiding most of the backlog:
the true pre-fix count was 69 staticcheck findings, not 34. This fixes all
of them, driving staticcheck to zero:
- ST1023/QF1011 (37): omit explicit types inferred from the RHS
- S1009/S1031 (15): drop redundant nil checks before len()/range
- SA9003 (9): remove comment-only empty branches, keeping the comments
- QF1007 (3): merge conditional assignment into declaration
- QF1006 (3): lift break conditions into loop conditions
- QF1001 (3): apply De Morgan's law / name the negated predicate
Also updates plans/lintfixes.md with the cap discovery and the corrected
errcheck picture (1202 uncapped, ~949 of them fmt.Fprint*).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drive errcheck to zero: config for bulk categories, propagate real errors
Adds .golangci.yml with errcheck exclude-functions for fmt.Fprint* (usage
printers), (*bufio.Writer).Write/WriteString (sticky errors, surfaced at the
now-checked final Flush), and (*strings.Builder).WriteString; pins
max-issues-per-linter/max-same-issues to 0 so CI reports true counts.
Real error paths now propagate instead of being dropped:
- Finalize{Reader,Writer}Options in join/put/filter/split/tee and the
repl/script entry points: 'mlr join -i badformat' now errors instead of
silently using wrong separators
- final output-stream Flush in pkg/stream: write failure no longer exits 0
- DSL emit/print/dump redirect writes, matching their sibling branches
- CSV writer WriteCSVRecordMaybeColorized, close-time Flush in file output
handlers, ENV[...] Setenv, REPL record-write and redirect-close errors
- termcvt write-side Close before rename (had "TODO: check return status")
The rest are deliberate ignores, marked with _ = and a comment where the
reason isn't obvious: unset-of-missing-path no-ops, read-side closes,
mid-stream FlushOnEveryRecord, init-time strftime registrations, in-memory
usage-capture pipes, and regtest-harness env/temp-file teardown.
golangci-lint now reports 0 issues on ./cmd/mlr ./pkg/... with all caps off.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
After batch-arena field allocation, profiling cat over 1M-record CSV showed
the remaining ~5M allocations were almost entirely per-record (one each):
the Mlrmap struct, the RecordAndContext wrapper, the CSV writer's []string,
and the go-csv parser's own buffers.
Address the first three:
- mlrval.RecordArena gains NewRecord(), vending the Mlrmap struct itself from
a per-batch slab (respecting --no-hash-records). Rolled out to every
line-based reader (CSV, CSV-lite, TSV, DKVP, NIDX, PPRINT, XTAB, DKVPX) in
place of NewMlrmapAsRecord.
- The CSV reader batch-allocates RecordAndContext wrappers from a per-batch
slab instead of one heap object per record (comment/output-string entries
still allocate individually, but they are rare).
- RecordWriterCSV reuses a single fieldsBuffer []string across records instead
of allocating one per Write; WriteCSVRecordMaybeColorized consumes it
synchronously and the writer is single-goroutine, so this is safe.
Effect (big.*, 1M records, cat, best of 5):
csv 0.26 -> 0.22
dkvp 0.51 -> 0.45 (Mlrmap slab)
For CSV, cat's allocation-object count drops ~5.0M -> ~2.1M. The remaining
~2M are the go-csv parser's per-record backing string and field slice, which
are intrinsic to parsing and would require a zero-copy/batch-slab parser
rework. A CPU profile of cat now shows it is I/O-bound (syscall ~56%, bufio
read+flush), with allocation/GC down to ~10% -- i.e. further allocation
trimming no longer moves cat's wall-clock. GOGC=off confirms (no change).
Verified: go test ./pkg/... and full regression suite pass; output is
byte-identical across all formats including record-retaining verbs (tac),
hashed and --no-hash-records.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* Lazy per-record hashing: ~15-30% faster on common workloads
Records (NewMlrmapAsRecord) eagerly allocated and populated a
map[string]*MlrmapEntry on construction whenever hashRecords was true
(the default). For streaming verbs that never look records up by key
(e.g. `mlr cat`) that map is pure overhead: a heap allocation plus N
map-inserts per record, and N more pointer-heavy objects for the GC to
scan. Profiling 1M-record CSV shows runtime allocation/GC machinery
dominating every workload, and `--no-hash-records` was 25-30% faster --
but that flag makes wide-record lookups O(n), the regression that
motivated hashing in #1506.
Make record hashing lazy instead: allocate no index up front; build it
in findEntry on the first lookup, and only when the record is wide
enough (FieldCount >= mlrmapHashThreshold) that linear search would
hurt. Narrow records and never-looked-up records never pay for a map;
wide records that are actually queried still get hash-accelerated
lookups, matching the old eager-hash default. DSL maps (NewMlrmap) keep
eager hashing to limit the behavioral surface.
This is transparent: findEntry already fell back to linear scan when
keysToEntries was nil, and every mutator already guarded on
keysToEntries != nil.
Measured (big.csv, 1M x 7 cols, default flags, best of 3):
cat 0.62 -> 0.47 (~24%)
put 1.08 -> 0.82 (~24%)
stats1 0.66 -> 0.57 (~14%)
sort 2.9 -> 2.0 (~30%)
Wide-column case protected: 60-col file with field lookups, lazy (1.42s)
matches old eager default (1.40s) and beats pure linear (1.55s).
Verified: go test ./pkg/... and full regression suite pass; output is
byte-identical to forced --hash-records for sort, stats1, cut,
wide-column put, and duplicate-key dedupe.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Batch-arena field allocation for line-based readers (approach B)
Following the lazy-hashing commit, profiling showed the dominant remaining
cost in read/write-bound workloads is allocation *operations* (not bytes):
each input field allocated two heap objects -- an Mlrval (FromDeferredType)
and an MlrmapEntry. For 1M x 7-field CSV that is ~13.4M of ~18.6M total
allocations.
Introduce mlrval.RecordArena, a per-batch slab allocator: a reader draws
each field's entry and value from contiguous []MlrmapEntry / []Mlrval slabs,
turning two allocations per field into roughly two per slab. The arena grows
on demand, so the size hint need not be exact; on duplicate keys it mirrors
PutReferenceMaybeDedupe semantics. findEntry/linkNewEntry already supported
externally-constructed entries, so this is transparent.
Wired into every line-based reader that builds records from deferred-type
strings: CSV, CSV-lite, TSV, DKVP, NIDX, PPRINT, XTAB, DKVPX. (JSON values
arrive already typed and are unaffected.) Readers with inline batch loops use
a local arena; those that build records via a helper (DKVP/NIDX line
splitter, XTAB stanza) hold the arena on the reader struct, reset per batch
and also initialized in the constructor so direct/test callers never see nil.
Measured (big.*, 1M records, default flags, cat, best of 3):
csv 0.46 -> 0.27 (~41%)
dkvp 0.75 -> 0.46 (~39%)
nidx 1.92 -> 1.58 (~18%)
(xtab ~flat: dominated by stanza parse/emit, not field allocation)
For cat the allocation-object count drops from ~18.6M to ~4.85M and peak RSS
from ~402MB to ~237MB (slabs are compact and freed as units). Alloc *bytes*
are essentially unchanged -- confirming the cost was per-allocation overhead,
not volume. Streaming and accumulating verbs (put/sort) are unchanged: their
bottleneck is DSL-side allocation / heap scanning, not field construction.
Verified: go test ./pkg/... and full regression suite pass; output is
byte-identical across all formats (hashed and --no-hash-records).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
The implicit-header readers for TSV and CSV-lite were missing the
`for` loop in their `nh < nd` branch, so when a data row had more
fields than the auto-generated header, only one extra field was
captured and the rest were dropped. Restore the loop, matching the
explicit-header readers and the pprint reader.
* Switch to integer ranges in for loops
Signed-off-by: Stephen Kitt <steve@sk2.org>
* Switch to slices functions where appropriate
A number of utility functions can be replaced outright; since Miller
can technically be used as a library, these are deprecated rather than
removed. go:fix directives ensure that they can be replaced
automatically.
Signed-off-by: Stephen Kitt <steve@sk2.org>
* Switch to reflect.TypeFor
This is slightly more efficient than TypeOf when the type is known at
compile time.
Signed-off-by: Stephen Kitt <steve@sk2.org>
* Switch to strings.SplitSeq instead of strings.Split
SplitSeq results in fewer allocations.
Signed-off-by: Stephen Kitt <steve@sk2.org>
* Drop obsolete build directives
Signed-off-by: Stephen Kitt <steve@sk2.org>
* Use min/max instead of explicit comparisons
Signed-off-by: Stephen Kitt <steve@sk2.org>
* Append slices instead of looping
Signed-off-by: Stephen Kitt <steve@sk2.org>
---------
Signed-off-by: Stephen Kitt <steve@sk2.org>
