Currently, adding a package which is required either for development or testing
requires it to be added in multiple places due to many duplicated Dockerfiles
and installation scripts. This makes it difficult to ensure that all scripts
are updated appropriately and can lead to some places being missed.
This patch consolidates the list of dependencies and adds installation
scripts for each package-manager used in our CI (apk, apt, dnf, pacman).
This change also replaces the `debian/dev-packages.lst` as this subfolder
conflicts with the Ubuntu/Debian packing scripts used for CRIU:
https://github.com/rst0git/criu-deb-packages
This patch also removes the CentOS 8 build scripts as it is EOL
and the container registry is no longer available.
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
criu_run_id will be used in upcoming changes to create and remove
network rules for network locking. Instead of trying to come up with
a way to create unique IDs, just use an existing library.
libuuid should be installed on most systems as it is indirectly required
by systemd (via libmount).
Signed-off-by: Adrian Reber <areber@redhat.com>
This commit removes the checks for the Python 2 binary in the makefile
and makes sure that ZDTM tests always use python3. Since support for
Python 2 has been dropped, these checks are no longer needed.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
This commit removes the dependency on the __future__ module, which was
used to enable Python 3 features in Python 2 code. With support for
Python 2 being dropped, it is no longer necessary to maintain backward
compatibility.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
In order to be able to run the zdtm tests inside a container,
we have to make sure that all protobuf sources have been compiled.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
The 'make docker-build' command creates a copy of all files from the
in local CRIU clone inside a container.
Then it runs 'make mrproper' inside the container, followed by
compilation of criu, followed by another 'make mrproper'.
After the last mrproper command, it attempts to check if
the clean was successful by running 'git clean'.
However, this check fails when the local repository contains
files that are not part of the repository.
For example, the vscode editor creates the folder '.vscode/'
which would be copied inside the docker container and cause
'make docker-build' to fail.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
The ENV1 variable was first introduced with commit
7290de5 (travis: enable ccache for docker/qemu builds)
and it is not used anymore.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
ccache was set up in Travis to speed up compilation by re-using the
.ccache directory from previous CI runs. As we are no longer using
Travis we can remove all CI related ccache setup.
Signed-off-by: Adrian Reber <areber@redhat.com>
CRIU is already using multiple CI systems and not just Travis. This
renames all Travis related things to 'ci' to show it is actually
independent of Travis.
Just a simple rename.
Signed-off-by: Adrian Reber <areber@redhat.com>
The previously introduced apt_install loop function to make package
install more robust against network errors is now moved to its own
script used in multiple places.
Signed-off-by: Adrian Reber <areber@redhat.com>
The `libprotobuf-c0-dev` virtual package is no longer available
in Debian Buster, but is provided by `libprotobuf-c-dev`, which
is available.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
For python2/python3 compatibility install additional (python2-future)
and different (python2-ipaddress) packages during test.
Also switch Fedora tests to explicitly install versioned python packages
(python2-* instead of python-*).
Signed-off-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
When we dump a veth device, the kernel reports where a peer device lives
and we use this information to restore this veth pair.
On restore we set a net ns id for a peer and it is created in the required
netns.
v2: add more comments
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Commit 299e4b4 ("travis: enable ccache for docker/qemu builds") combined
multiple RUN statements in Dockerfiles into a single one, which is good
for performance (as there is an intermediate cache created after each
statement). Unfortunately, it partially did so by combining statements
with use of semicolons, meaning we are ignoring non-zero exit codes.
As a result, failure from make are ignored and Travis builds are all
green.
To fix, replace all occurences of semicolon with &&.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
As we compile-test non-x86_64 architectures under qemu emulation,
it works pretty slow.
Dmitry Safonov suggested, and Andrey Vagin initially implemented
supporting ccache for such builds. This patch is based heavily
on Andrey's work -- all the bugs added are purely mine though.
Performance results: in an ideal environment (two builds of the same
code, one with cold (empty) ccache, another with the hot one)
I saw compile time improvements of 4x to 5x, and total test run time
improvement up to 2x to 2.5x. In layman terms, the complete test run
that was taking more than 50 minutes now takes about 25!
Notes on handling .ccache directory:
1. Before running docker build, .ccache directory (saved in between
runs by Travis) is moved to criu source code root, from where it
is copied by docker together with criu sources.
2. In Dockerfile, .ccache gets moved to /tmp, and CCACHE_DIR
is set accordingly.
3. After running docker build, .ccache is copied out from docker
container back to the host (from where it is saved by Travis).
Ccache envorinment notes:
1. CCACHE_NOCOMPRESS is needed because otherwise tons of time is spent
on compression/decompression (big performance hit under qemu).
2. CCACHE_CPP2 is required with clang, see detailed explanation at
http://petereisentraut.blogspot.com/2011/09/ccache-and-clang-part-2.html
The logic of setting CCACHE_CPP2 in Dockerfile is somewhat fancy;
unfortunately I was not able to come up with a simpler approach.
Misc:
1. Travis runs "ccache -s" after the build is completed. A call to
"ccache -s" is called to Dockerfile before make, so one can
compare before/after numbers.
2. make invocations are surrounded by "date" calls so one can get the
compilation times.
Changes in v2:
- consolidate Dockerfile statements (ENV, RUN)
- single object make test is no longer commented out
- simplify "make mrproper" test
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
It took a little time on travis (I didn't measure, just starred
at build and it added not visible delay for build).
But it will help to verify that compel works on all supported arches.
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
C compiler might generate calls to memcpy, memset, memcmp, and memmove
as it seem fit (so far we haven't seen memmove being required). That
means we need to provide our own versions of it for code which is not
linked to a libc.
We already have a solution for that in commit bdf6051
("pie: provide memcpy/memcmp/memset for noglibc case")
but we faced another problem of compiler trying to optimize
our builtin_memset() by inserting calls to memset() which
is just an alias in our case and so it lead to infinite recursion.
This was workarounded in commit 8ea0ba7 ("string.h: fix memset
over-optimization with clang") but it's not clear that was a proper
fix.
This patch is considered to be the real solution. As we don't have
any other implementations of memset/memcpy/memcmp in non-libc case,
we can call ours without any prefixes and avoid using weak aliases.
Implementation notes:
1. mem*() functions code had to be moved from .h to .c for the functions
to be compatible with their prototypes declared in /usr/include/string.h
(i.e. "extern").
2. FORTIFY_SOURCE needed to be disabled for code not linked to libc,
because otherwise memcpy() may be replaced with a macro that expands
to __memcpy_chk() which of course can't be resolved during linking.
https://travis-ci.org/kolyshkin/criu/builds/198415449
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
It will be used to generate tcp packets for restoring half-closed sockets.
travis-ci: success for series starting with [01/21] build: install libnet-dev
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
travis-ci: success for series starting with [1/3] zdtm: call test_init() before doing anything
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
In this file one can add options with which to build CRIU.
Each line is (for now) expanded into CONFIG_$(TEXT) macros
defined in config.h that can be tested later in the code.
v2: Add .config to .gitignore
v3: Don't check that make mrproper removes .config
https://github.com/xemul/criu/issues/235
travis-ci: success for Don't compile in binfmt_misc dumping code by default (rev3)
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Reviewed-by: Dmirty Safonov <dsafonov@virtuozzo.com>
As it should be built anyway - it will not increase build time
significally.
Cc: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
With this, one can do a CRUI build via QEMU+Docker using clang
as a compiler, for example:
make -C scripts/build alpine-clang
make -C scripts/build ppc64le-clang
For alpine, default clang version is used. For others, a version has
to be specified explicitly, as there is no package called "clang" in
Ubuntu Trusty (which is used as a base for most arches). Since
clang-3.8 appears to be available from Trusty, and this is the current
stable version of clang, let's use it.
travis-ci: success for QEMU+Dockerfile improvements + clang build
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
I just spent some considerable time trying to figure out the source
of errors like this:
make -C scripts/build ppc64
...
DEP images/autofs.pb-c.d
In file included from images/autofs.pb-c.c:9:0:
images/autofs.pb-c.h:7:35: fatal error: protobuf-c/protobuf-c.h:
No such file or directory
#include <protobuf-c/protobuf-c.h>
^
compilation terminated.
It appears that we copy the complete tree to a docker container, and it
is not cleaned properly before the build. In particular, images/*.pb-c.{c,h}
are not removed/rebuilt. The problem is not noticeable until version of
protobuf-c differs between the host and container, and they use different
include paths (/usr/include/google/protobuf-c/ vs /usr/include/protobuf-c).
As I don't want anyone else to spend so much time figuring this out,
here is the patch.
travis-ci: success for QEMU+Dockerfile improvements + clang build
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Let there be more make-tests.
Cc: Adrian Reber <adrian@lisas.de>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
qemu-static from ubuntu/xenial contains a required fix
and now we can execute compilation for ppc64le in travis.
v2: rebase on criu-dev
v3: set QEMU_CPU=POWER8 to avoid segfaults of qemu-ppc64le-static
> > By default, both qemu and gcc5 produce code on ppc64el which will run on
> > POWER7 platform. However, in debian gcc build instruction, gcc is explicitly
> > built to produce code for POWER8 platform, which, obviously has additional
> > instructions.
v4: use ubuntu:trusty. xenial and wily has a bug:
Processing triggers for libc-bin (2.21-0ubuntu4.1) ...
/sbin/ldconfig.real: 5: /sbin/ldconfig.real: Syntax error: ")" unexpected
/sbin/ldconfig.real: 5: /sbin/ldconfig.real: Syntax error: ")" unexpected
v5: arm, x86, aarch64 were removed by mistake
Signed-off-by: Andrew Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
These packages are needed for proper build:
* git-core: to get CRIU version (see Makefile)
* pkg-config, libselinux-dev: to check for selinux
(see criu/Makefile.config)
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Acked-by: Andrew Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Fixes: afae962c66 ("dockerfile: extract a common part in one file")
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
