Raise an exception for kernels that do not have userfaultfd. For the
kernels that have userfaultfd but do not provide non-cooperative events
(4.3 - 4.11) just print a warning.
Fixes: #363
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
* select excluded tests based on the kernel version
* test local and remote lazy-pages with and withour pre-dump
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
They still will fail with --remote-lazy-pages, so mark them as
'noremotelazy'
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
This allows skipping tests that are not yet run with --remote-lazy-pages,
but can be run with --lazy-pages
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
When running with --lazy-pages or --remote-lazy-pages, the daemons should
run in the background, rather than complete before t.stop() is called.
Many tests try to verify things are ok after test_waitsig() and that's
exactly the place where they access memory and cause page faults.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
The lazy-pages daemon have to properly track changes to virtual memory
layout of the restored process. The test verifies that lazy-pages daemon
properly reacts to fork(), exit(), madvise(MADV_DONTNEED) and mremap()
events.
Currently, no zdtm tests would generate UFFD_EVENT_{REMAP,REMOVE}.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
It works faster and allows to check exit codes.
travis-ci: success for series starting with [1/2] page-server: don't return a server pid from page-server
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
travis-ci: success for crtools: close a signal descriptor after passing a preparation stage (rev6)
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Currently we are waiting for lazy-pages daemon to finish as a part of
.restore method, which may cause filling test process memory before the
test process resumed it's execution after call to test_waitsig(). In such
case, no page faults occur, but rather all the memory is copied in
handle_remaining_pages method in uffd.c.
Let's move wait(<lazy-pages-pid>,..) after call to test.stop().
travis-ci: success for lazy-pages: add non-#PF events handling
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Add pre-dump and remote-lazy-pages passes to criu-lazy-pages.sh
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Lazy migration requires both dumped and restored processes to coexist at
the same time. This breaks some basic assumptions in the zdtm design.
Simulation of lazy migration with the page server allows testing most of
the involved code paths without major intervention into zdtm
infrastructure.
travis-ci: success for lazy-pages: improve testability (rev2)
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
The kernel support for lazy pages (userfaultfd) lacks many important
features which effectively prevents success in certain tests.
Allow skipping such test with somewhat informative message
travis-ci: success for lazy-pages: improve testability (rev2)
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Right now the zdtm.py hacks around core code and waits for
a second for the socket to appear. Let's better make proper
--daemon mode for lazy-pages daemon and pidfile generation.
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Very minimalistic at the moment, no remote pages and namesapces.
Still better than nothing :)
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Adrian Reber <areber@redhat.com>
Signed-off-by: Andrew Vagin <avagin@virtuozzo.com>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
There's two issues with this code:
1. Child task is killed by parent faster, than it could print the line.
2. Even if it had time to print it - there would always be 0, because
it's called from child process.
Obviously, this print was meant to be in parent process. So, let's move
it there.
Signed-off-by: Vitaly Ostrosablin <vostrosablin@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
When files are added to the report shutil.copytree is unhappy with
lazy-pages.socket. Tell shutil.copytree that it should ignore *.socket.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
This test can be used to verify FP and VX registers on s390:
- Verify that "criu restore" sets the correct register sets
from "criu dump":
$ zdtmp.py run -t zdtm/static/s390x_regs_check
- Verify that dumpee continues running with correct registers after
parasite injection:
$ zdtm.py run --norst -t zdtm/static/s390x_regs_check
$ zdtm.py run --norst --pre 2 -t zdtm/static/s390x_regs_check
$ zdtm.py run --check-only -t zdtm/static/s390x_regs_check
Reviewed-by: Alice Frosi <alice@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
We have to include Makefile.inc earlier in order to use SRCARCH.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Debian is compiled for z900 - therefore we can't use the "laa"
instruction.
Fix this and replace "laa" by the older "cs" (compare and swap) loop.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
On s390 we have special console drivers with minors 64 and 65.
Add support for them in criu code and in zdtm testsuite.
Reviewed-by: Alice Frosi <alice@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
If the kernel contains patch ee71d16d22 ("s390/mm: make TASK_SIZE
independent from the number of page table levels") we are able
to checkpoint tasks > 4TB.
Add a testcase to verify this.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Use "union semun" for semctl() to make testcase also work on s390x.
Signed-off-by: Alice Frosi <alice@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
The TEST_STRING "Hello World!" has 13 bytes size. Therefore the 10 bytes
used for the buffer size are not sufficient.
Fix this and use sizeof() to be on the safe side.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Newer glibc releases have removed SIGUNUSED from bits/signum.h which
breaks building criu on those systems:
https://sourceware.org/git/gitweb.cgi?p=glibc.git;a=commitdiff;h=8082d91e1c449e0cb137468b731004a5e605c8c6
SIGSYS returns the same value as SIGUNUSED and testing has shown
that criu still successfully completes zdtm with this patch.
Signed-off-by: Adrian Reber <areber@redhat.com>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
We don't want to run tests, if a kernel has a problem. And we want
to know when the taint flag is changed.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
'tcp-close' is a option that replaces connected tcp-sockets with
'closed' ones during restoring, therefore it have no sense without
restore stage. Thus let's skip related tests if the 'norst' flag was
specified.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
There are 2 test cases:
1. Connected socket should be restored in the closed state
2. Listening socket state should not change after restore
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Eugene Batalov <eabatalov89@gmail.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
"With the recent kernel changes criu should never look outside of start-end
region reported by /proc/maps; and restore doesn't even need to know if a
GROWSDOWN region will actually grow or not, because (iiuc) you do not need
to auto-grow the stack vma during restore, criu re-creates the whole vma
with the same length using MAP_FIXED and it should never write below the
addr returned by mmap(MAP_FIXED)" // Oleg
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Ubuntu 14.04 (Travis) doesn't have it.
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Looks-good-to: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Having a "header library" is nice if it's small and clean, but
- we compile its code a few times;
- there is no distinction between internal and external functions.
Let's separate functions out of header and into a .c file.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
The function is not included into the library, so having its prototype
there was a shortcut. Move it to a separate include file.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
This is an auxiliary source file. The corresponding object file was
cleaned, but .d was not. Add it to SRC/OBJ/DEP so the appropriate files
will be cleaned automatically.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
MAKEFLAGS += -r only works for sub-make, and it is not applicable to
the current instance. Since previous commit make is not re-running
itself (after re-reading deps files), so MAKEFLAGS no longer works.
Use one more way to disable built-in rules that stand in our way.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
As it was pointed out by our esteemed maintainer (let his light shine),
after my recent changes to test/zdtm Makefiles all dependencies are
regenerated even if we only need to build a single test (for example,
cd test/zdtm/static && make env00).
This was caused by "-include $(DEP)" statement. Make sees that these files
are need to be included, but are missing, and since it knows how to generate
them it goes on to do so.
The solution is to use $(wildcard) function which returns the list of
_existing_ files, and so include will only receive the files that exist.
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
inotify_system_nodel.c is supposed to be a symlink to inotify_system.c,
but somehow the file was committed. This, together with the statement
in Makefile to recreate the file, lead to replacing the file with a
symlink during make.
Remove the file, add the symlink, and remove the Makefile rule.
PS yes, I have checked the files are identical.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
It is required for cases when we inject a fault in criu restore.
In this case we execute "criu restore" and check that it fails,
then we execute "criu restore" without a fault and check that it passes.
If the first "criu restore" restores only a part of processes,
the second criu can get PID of one of restored processes.
https://github.com/xemul/criu/issues/282
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Let's pretend that we're doing something ;-D
FWIW: cleaning two lines in the test output:
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
========================== Run zdtm/static/tty03 in h ==========================
make[2]: Nothing to be done for `default'.
Start test
make[2]: Nothing to be done for `default'.
./tty03 --pidfile=tty03.pid --outfile=tty03.out
Run criu dump
Run criu restore
Send the 15 signal to 24
Wait for zdtm/static/tty03(24) to die for 0.100000
Removing dump/zdtm/static/tty03/24
========================= Test zdtm/static/tty03 PASS ==========================
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
